How do I connect my Blu ray player to my amp and TV?

How do I connect my Blu-Ray player to my amp?

The best way to connect a Blu-ray player to the rest of your system is also the simplest—a single HDMI cable from the player’s HDMI output to one of the HDMI inputs on you’re A/V receiver or preamp/processor. (Of course, you’ll also connect the HDMI output from the AVR or pre/pro to the TV.)

How do I get sound from my Blu-Ray player to my TV?

To output sound from a TV, connect the TV to the HDMI OUT 1 jack of the Blu-ray Disc player and change the HDMI Audio Output setting to Auto or HDMI1.

How do I connect my Blu-ray Player to my receiver without HDMI?

Connect the 3 separate connectors of component video cable with the COMPONENT VIDEO IN BD/DVD port of your receiver. Connect the red and white cables of your component video cable to the AUDIO IN BD/DVD ingang.

Why won’t my Blu-ray Player play sound?

Make sure the Audio device is set to the correct input. Try a different audio cable, your cable may have stopped working. Try to hook the Blu-ray Player directly to the TV, or try to hook the audio cable to a different sound device. Try to unplug the Blu-ray Player, then plug it back in.

IMPORTANT:  How long should an NVMe SSD last?

Can I connect my Blu-ray player to my cable box?

Connect a Blu-ray player to a TV and a cable box by hooking both devices into the TV. This enables you to use the Blu-ray player or the cable box just by changing the input selections on your TV.

How do I connect my Blu-ray player to my satellite receiver?

Connect one end of the HDMI cable to the BluRay connector labeled HDMI, Output, Monitor or TV and the other end to any Input HDMI connector on the Receiver. Connect one end of the HDMI cable to the Receiver connector labeled HDMI, Output, Monitor or TV and the other end to any Input HDMI connector on the TV.

Do Blu-Ray players have audio outputs?

All Blu-ray players have an HDMI output to connect the player to your TV or receiver. … Many players offer optical or coaxial digital audio outputs for sending audio to an older home theater receiver or a sound bar.

How do I use my DVD player as an amplifier?

How to connect my Philips DVD player to TV/amplifier?

  1. On the DVD player panel, press AV IN/OUT to select A/V OUT.
  2. Connect the mini plug to the AV OUT jack of the player.
  3. Connect the red plug to the AUDIO IN R jack and the white plug to the AUDIO IN L jack of the additional equipment (such as a TV)

Why is audio not working through HDMI?

Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV. … You may need an update to your set-top box firmware, or a newer set-top box from your service provider.

IMPORTANT:  Quick Answer: Is it better to partition hard drive?

Why is there no sound coming out of my DVD player?

Ensure the audio cables from the DVD player are connected properly to the television or stereo receiver. … Attempt to play a different disc in the DVD player. Try playing a different audio source through the television or receiver. Connect the DVD player to a different audio input on the television or receiver.

How do I enable HDMI audio?


  1. Right-click the volume icon in the system tray.
  2. Click “Playback Devices”
  3. Find your HDMI Output device, and either right-click it and select Enable, or open Properties and set “Device Usage” to “Use this device (Enable)”
Information storage methods