How do I manually eject a disc from my Samsung Blu ray player?

Unplug the player, then hold the Power button for 20 seconds to discharge any lingering current in the Blu-ray player. Next, plug it back in, press Stop, and then try to eject the disc.

How do you get a stuck DVD out of a Blu-ray player?

Disc stuck in my Blu-Ray player/DVD player

  1. Turn off your device and disconnect the power plug for at least 10 seconds.
  2. Plug it back in and power ON your device.
  3. Press the eject button shortly after turning on the device. …
  4. If this procedure does not work, don’t attempt to dislodge the disc yourself.

How do you open a Samsung DVD player?

Follow these steps to unlock or release the tray: Turn on the Home Theater System. Press the STOP button and the EJECT button simultaneously for five seconds. The message UNLOCKED will be displayed to indicate that DVD disc tray is unlocked.

What do you do when a DVD player gets stuck?

Here’s what to do:

  1. Unplug the disc player.
  2. Take out the screws securing the cover and remove it. …
  3. Blow air into the mechanism to remove dust.
  4. Plug the player back in.
  5. Try ejecting the tray.
  6. If it doesn’t eject, look for something jamming the tray. …
  7. Also see if the belt is damaged or broken or fell off.
IMPORTANT:  Best answer: Can you upload DVDs to iTunes?

How do you get a stuck DVD out of a slot drive?

Insert two plastic cards (library, credit cards, or similar) into the slot and try to hold them as far apart as possible. The idea is to try and get one above the disc being ejected and one below it and, after pressing the eject button, you should be able to grip the disc with the two cards and slowly pull it out.

How do I unlock my Blu-Ray player?

For 2016 Blu-ray Disc players Follow these steps to lock on unlock the player.

  1. Using the supplied remote control, press and hold the STOP, HOME and TOP MENU buttons.
  2. When LOCKED or UNLOCKED appears on the display of the Blu-ray Disc player, release the buttons.

How do I fix my Samsung DVD player that won’t open?

Power cycle the player, and try again.



Unplug the player, then hold the Power button for 20 seconds to discharge any lingering current in the Blu-ray player. Next, plug it back in, press Stop, and then try to eject the disc.

How do you reset a Samsung DVD player?

How to Reset a Samsung Blu-Ray Player

  1. Make sure there is no disc in the player.
  2. Press and hold the Eject button on the device for at least 8 seconds.
  3. On the screen you will see a message that the device is being reset.
  4. The player will automatically power off and reset then it will show the initial setup screen.

How do I fix my Samsung DVD player?

Attempt a power reset by pressing and holding the Fast Forward button for more than 5 seconds. All of the player’s settings will be reset to their factory settings. If the power does not turn off, unplug the power cord from the electrical outlet for one minute, and then plug the cord back in.

IMPORTANT:  How many times can you erase a DVD RW?

How do you fix a DVD player that won’t turn on?

Check to make sure that the unit is plugged in securely to the power source (outlet, or power strip). Press the Power on/ standby button on the front of the unit to turn the unit on. Reset the unit by unplugging it for one (1) minute. Then plug it back in to the power source and power the unit on.

Why does my DVD player just say loading?

Possible Reasons & Fixes to DVD Player Loading Problem



If the DVD player is not loading all discs, then there could be dirty or bad lens and mainboard of the DVD player. … Try another disc, if dvd player stuck on loading problem doesn’t happen with another disc, check if the problematic disc is dirty or scratched.

Information storage methods