How do I play a DVD on Xfinity?

How do I get my DVD player to play on my TV?

To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.

Can you hook up a DVD player to a Comcast cable box?

If you are using a Comcast cable box, you cannot use the DVD player unless you hook it up to your cable box so it plays on the “line input” channel of your television set.

What channel should TV be on for DVD player?

If your television does not offer Audio/Video inputs, you will need to purchase an RF modulator. This will be a small box that will have composite Audio/Video inputs on one side and a Coaxial RF output on the other. This device will allow you to view the DVD Recorder on channel 3 or channel 4.

IMPORTANT:  How big is a 32GB flash drive?

How do I connect my DVD player to my cable box?

Plug the HDMI or s-video cable into the appropriately labeled port on the back of the DVD player. If you’re using an s-video cable, you’ll also need to plug the red and white RCA cables into the red and white ports on the back of the DVD player.

Why won’t my DVD player play on my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

How do you play a DVD on a smart TV?

Step 2: Start to play DVDs on TV



You should see the DVD player, then select the corresponding input using the TV’s remote. 2. Now open the disc tray of the DVD player, put in your DVD and press play. Once the DVD is loaded, you should see the DVD menu on the TV, select Play or Enter to watch the DVD on smart TV now.

Can you put a DVD player on top of cable box?

Yes as long as the weight does not exceed shelf capacity and you place it low enough to stack the units together.

Why does my TV say no signal when I plug in my DVD player?

Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. … If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.

IMPORTANT:  Which is best HDD or SSD or hybrid?

How can I watch a DVD on my smart TV without a DVD player?

So if you have your titles on disc that you want to play on your TV set without DVD player, USB drive is a great option. You can convert your DVDs and put them on a USB drive with a good DVD to video converter.

What cable do I need to connect DVD player to Smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

How do I connect my DVD player to my TV and set top box?

This connection should be used if your TV, set-top box, and DVD player have HDMI jacks. If your TV has a DVI jack instead of an HDMI jack, you can use a HDMI to DVI adapter and a composite audio cable. 1. Connect the coaxial cable from the wall to the RF IN jack on the set-top box.

How do I connect an old DVD player to a new TV?

If so, you can get yourself a component cable and connect the DVD player to the TV using those plugs. You can plug the RCA (yellow/red/white) output in to this box and connect the HDMI output from the box to your TV using an HDMI cable.

Information storage methods