Can you repair damaged DVD disk?
If the scratch is on the top, shiny part of the disc, the disc is not repairable and all the data is lost. If the scratch is on the bottom, plastic part of the disc, you may be able to repair the disc by resurfacing and polishing it. … Dry the disc with a lint-free cloth. Squeeze toothpaste on the disc.
How do you fix a DVD that is not reading discs?
Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.
How do you get a disc to work again?
Incredibly, scratches in the surface of a CD or DVD can be fixed with softened wax! As with the toothpaste fix, you can use shoe polish, lip balm, furniture wax, or even petroleum jelly. Again, rub it into the surface of the disc to fill the scratch. With a lint-free cloth, wipe of the excess wax, with a radial action.
How can I fix my scratched DVD?
Apply a small dab of white toothpaste or metal polish to a clean, lint-free (ie fluff-free) cloth and rub very gently along the scratch from the disc’s centre outwards. Cover the full length of the scratch, then repeat twice for good measure.
How do I make a DVD unreadable?
An easy way to make discs unreadable is to just cut them in half with scissors. The polycarbonate is pretty soft and quite easy to cut. If you don’t want to bother actually cutting the discs in half (the center part can be pretty tough) then just cut slits from the outer edge towards the center.
How do you fix a disc that won’t read?
If your CD/DVD drive is having trouble recognizing a disc:
- If you know the disc isn’t blank, check whether the data surface is damaged. …
- Try a different disc. …
- Try the disc in another computer’s drive. …
- Try cleaning the drive with a CD/DVD drive cleaning product.
Why is my DVD player not reading the disc?
When the DVD player says no disc, it means the sensor is not recognizing a disc in the tray. The cleaning should help solve this problem but it may persist. Try a number of different discs to see if the problem is disc-related. … If the problem persists, cleaning the lens on a reader is necessary.
What would cause a DVD player to not read discs?
No-disc errors are usually caused when the DVD or the laser-lens pickup has become dirty and causes the DVD player to not be able to read the DVD. … Clean the laser lens with a DVD laser lens cleaning disc. DVD laser lens cleaning discs can be purchased at most electronics retailers or online.
How do you fix a DVD player that won’t open or close?
Here’s what to do:
- Unplug the disc player.
- Take out the screws securing the cover and remove it. …
- Blow air into the mechanism to remove dust.
- Plug the player back in.
- Try ejecting the tray.
- If it doesn’t eject, look for something jamming the tray. …
- Also see if the belt is damaged or broken or fell off.
How does Vaseline remove scratches from CDs?
Simply take a cotton ball and dip it in some alcohol to clean the area near the scratch. Then apply Vaseline or Petroleum Jelly to the disc. The Vaseline will fill in the scratch, hopefully making it readable again.
Can a scratched DVD still work?
Because standard CDs and DVDs have a protective layer, these discs can usually withstand several scratches with no issues. However, a deep scratch or a lot of scratches can cause the disc to not work correctly.
Is there any way to fix a scratched CD?
Start with a basic toothpaste, something natural without any fancy gels, swirls or flavors. Squeeze a small amount onto the CD starting at the middle radius and rub it in using a sweeping motion until the entire CD is covered in a light layer of toothpaste. Let it dry, then rinse it off using tepid water.