How do you fix a DVD player that won’t play?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

What do you do if your DVD won’t play?

My DVD Won’t Play

  1. Clean the Disc. Dampen a soft cloth or paper towel. …
  2. Test the Disc and Machine. Play the disc in a different machine. …
  3. Troubleshoot DVD & TV Connections. Unplug the cables connecting the DVD player to the television. …
  4. Last Resorts. Buy a DVD laser lens cleaner disc.

What would cause a DVD player to not read discs?

No-disc errors are usually caused when the DVD or the laser-lens pickup has become dirty and causes the DVD player to not be able to read the DVD. … Clean the laser lens with a DVD laser lens cleaning disc. DVD laser lens cleaning discs can be purchased at most electronics retailers or online.

How do you reset a DVD player?

On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.

IMPORTANT:  Is it better to have more hard drive or memory?

Why isn’t my DVD player working on my TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

How do you fix a DVD drive that won’t read discs?

If your CD/DVD drive is having trouble recognizing a disc:

  1. If you know the disc isn’t blank, check whether the data surface is damaged. …
  2. Try a different disc. …
  3. Try the disc in another computer’s drive. …
  4. Try cleaning the drive with a CD/DVD drive cleaning product.

How do you fix a DVD player that won’t open or close?

Here’s what to do:

  1. Unplug the disc player.
  2. Take out the screws securing the cover and remove it. …
  3. Blow air into the mechanism to remove dust.
  4. Plug the player back in.
  5. Try ejecting the tray.
  6. If it doesn’t eject, look for something jamming the tray. …
  7. Also see if the belt is damaged or broken or fell off.

How do you know if your DVD player is bad?

Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.

IMPORTANT:  What are hard drive platters coated with?

How do you reset a DVD player without a remote?

To power reset, turn OFF the DVD player and unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord back into the electrical outlet and turn the player ON. Attempt to open the disc tray.

Information storage methods