How do you hook up a Sony DVD player to a smart TV?

Connect one side of an HDMI cable to the back of the DVD player. The other side of the HDMI cable connect it to an available input on your TV. Turn on the DVD player, and using the TV’s remote, select the corresponding input. At this point, you should see the DVD Player logo on your TV screen.

How do you hook up a DVD player to a smart TV without HDMI?

Connect the composite video cable (Yellow RCA) to the DVD player. Next, connect the White and RED audio RCA cables to the corresponding connectors on the back of the DVD player. Take the other side of the composite cable and audio cables and connect them to your TV.

How do I hook up my old DVD player to my new TV?

How to Hook Up DVD Player to an Older TV

  1. Plug the TV into the modulator’s jack labeled either “to TV” or “output.”
  2. Connect the RCA yellow-colored video cable to the “video in” or yellow-colored “input” port on the modulator.
  3. Turn on the DVD player, TV, and modulator box.
IMPORTANT:  Can you see when a hard drive was last accessed?

How do I get my DVD player to play on my TV?

To connect your TV to your DVD player, plug the included cables (HDMI and/or composite cable) into both the player and the TV ports. Then, make sure the TV and DVD player are both plugged in and turn them on. Insert a DVD to test it out.

Why won’t my DVD player work on my smart TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

Why does my TV say no signal when I plug in my DVD player?

Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. … If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.

What cable do I need to connect DVD player to TV?

Step 1: Plug the HDMI cable into the Blu-ray or DVD player. Step 2: Plug the opposite end of the HDMI cable into the HDMI port on your TV. Step 3: That’s it! Make sure to select the correct input on your TV to connect with your player.

IMPORTANT:  Quick Answer: Is Western Digital My Passport SSD or HDD?

How do you hook up a VCR and DVD player to a smart TV?

S-Video. Connect an S-Video cable to the “S-Video Out” port on your VCR/DVD combo player. Plug the opposite end of the S-Video cable to the “S-Video In” port on your TV. Connect a set of RCA audio cables to the red and white color-coded “Audio Out” jacks on your VCR/DVD combo player.

How do I switch my Samsung TV to DVD player?

How to Connect a DVD to a Samsung TV

  1. Locate the HDMI input on the back of the Samsung TV. …
  2. Insert one end of the HDMI cable into the “HDMI IN” port. …
  3. Plug the other end of the HDMI cable into the “HDMI OUT” port on your DVD player.

Can you hook up a DVD player to a TV without cable?

You shouldn’t need cable service to connect a DVD player to your TV. How have you attempted to connect the DVD player to the TV? Usually a DVD player is connected via an HDMI cable or composite or component cables.

Information storage methods