Is my DVD drive IDE or SATA?

If the drive’s cable is small (left), then your computer uses SATA drives. (The SATA connector is often labeled, too.) If you see a wide, flat ribbon cable (right), then your computer uses IDE drives.

How do I know if my DVD is SATA?

Failing that: the age check: If your laptop is less than 10 years old it will be SATA. If it came with a harddisk larger then 500MB it will be SATA based (both drive and CD/DVD ROM). One more, which is rather kludgy. If you can eject a DVDDrive (not just the DVD, but the whole drive) then it is SATA in AHCI mode.

How do I know if my CD drive is SATA 2 or 3?

On the left in the device selection panel go to the Motherboard section. The right side of the window will show which SATA ports are available. If 6 Gb / s is written near the port, it means that it is SATA 3 standard. If 3 Gb /s is written near the port, it means that it is SATA 2 standard.

What cable do DVD drives use?

Your drive either uses a SATA power cable (left) or a Molex power cable (right). SATA power connectors are almost always black; Molex connectors are almost always white. Both of them only fit one way — the right way.

IMPORTANT:  What is the difference between a Fusion drive and SSD?

Which SATA port for DVD drive?

If you are installing a single SATA hard drive, it is best to use the lowest numbered port on the motherboard (SATA0 or SATA1). Then use the other ports for optical drives.

Can you burn a CD on a DVD-RW drive?

Most computers today can write information to a CD and DVD using an approach known as burning. … If your drive says DVD-RW Drive, you’ve hit the jackpot: Your drive can both read and write to CDs and DVDs.

Can you burn a DVD-R in a DVD-RW drive?

Can a DVD drive also burn DVD blank disc? No. The only drive capable of creating a DVD is a DVD-R, DVD+R, or DVD+-RW drive. A traditional DVD drive is only capable of reading a DVD, but not write to a disc or burn a blank disc.

Can you burn music to a DVD-RW disc?

Insert a blank CD or DVD suitable for storing audio files in your computer CD/DVD-RW drive. … Click through albums and playlists and drag the songs you want to add to the CD/DVD to the Burn pane. Continue dragging songs to the Burn pane until you have the mix you want. Click Start Burn.

How do I know if my Windows hard drive is SATA or IDE?

Look for the “Interface” option in the specifications. SATA drives generally will be referred to as “SATA,” “S-ATA” or “Serial ATA,” while PATA drives may be referred to as “PATA,” Parallel ATA,” “ATA” or, on older drives, simply as “IDE” or “EIDE.”

Information storage methods