Question: What do you do if your DVD player wont play?

Why won’t my DVD player play my DVD?

Make sure that the disc has been inserted properly into the player. Make sure that the DVD player is connected properly to the TV . Check that the TV where the DVD player is connected to is set to the right input. … Make sure the DVD region code and format of the discs are compatible with the player.

What causes a DVD player to stop working?

If you have a problem with your DVD player not reading discs, the lens is often to blame. Luckily, it’s usually a dirty lens that impedes your DVD player’s ability to read media. Still, sometimes a lens can simply burn out and stop working, which means a replacement is in order.

Why does my TV say no signal when I plug in my DVD player?

Change the INPUT or source the HDTV is set to by pressing the INPUT button on the TV or its original remote. When you try different inputs, let the DVD player play a disc and output a constant signal. … If your TV has the correct INPUT or Source, unplug the cable and plug it back, or try another cable or port.

IMPORTANT:  Can I install Microsoft Office on external hard drive?

What channel does TV need to be on for DVD player?

If your television does not offer Audio/Video inputs, you will need to purchase an RF modulator. This will be a small box that will have composite Audio/Video inputs on one side and a Coaxial RF output on the other. This device will allow you to view the DVD Recorder on channel 3 or channel 4.

How do you reset a DVD player?

On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.

Why is my brand new DVD not working?

Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.

Why does my TV say no signal when HDMI is plugged in PS4?

General HDMI Troubleshooting. Make sure the PS4 is connected to the correct HDMI port. … Try unplugging and re-plugging the HDMI cable in again to make sure you have a secure connection. If it’s connected to the correct port, you could switch it to another available port and try again.

Why does my Vizio TV say no signal when HDMI is plugged in?

If your Vizio TV’s HDMI port is not working, the most successful fix is to perform a hard restart by unplugging it from the power. Alternatively, you may need to replace the HDMI cable or port, change the device display settings, update your firmware or perform a factory reset.

IMPORTANT:  What effect does formatting a hard drive have?

How do I fix no signal?

Reset the box

  1. Turn everything off at the wall.
  2. Check that all cables are securely and firmly in place.
  3. Wait for 60 seconds.
  4. Plug your TV box (not the television set) in and turn it on.
  5. Wait another 60 seconds, or until the lights on the TV box have stopped flashing.
  6. Plug everything else back in and turn it all back on.
Information storage methods