Quick Answer: How do I get my CD drive to work on my laptop?

With the tray type, you push a button, and a disc tray pops out of the laptop’s body, or the tray might pop out when you use an Eject command in Windows. You pull the tray out the rest of the way and snap the CD or DVD into the tray. Then you gently push the tray back inside the laptop.

What do I do if my laptop CD drive is not working?

In the Device Manager window, expand DVD/CD-ROM drives. Right-click the CD/DVD/Blu-ray drive that is listed, and then click Uninstall. Click OK to confirm that you want to remove the device. Restart your computer (Once the restart is complete, the Operating System will automatically install the required drivers).

Why won’t my laptop recognize my CD drive?

Reinstall or Update Driver in Device Manager

Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. … Windows 10 will detect the drive then reinstall it.

IMPORTANT:  How do I fix hard drive detects imminent failure?

What to do if CD is not reading?

If the issue is not resolved, proceed to the next troubleshooting step.

  1. Verify the optical disk drive is recognized in Device Manager.
  2. Set the AutoPlay settings in windows to defaults.
  3. Run the Dell PC Diagnostics on the Optical Disk Drive (CD, DVD or Blu-ray drive)
  4. Disable the DMA mode of the optical disk drive.

How do I enable my CD drive?

How to enable the DMA settings of a hard disk drive, CD-ROM, CD-R/RW and DVD-ROM drive?

  1. Start Control Panel.
  2. Double-click System.
  3. Click the Device Manager tab.
  4. For hard disk drive, click to expand Disk Drive. …
  5. Right-click on the necessary drive and click Properties.
  6. Click the Settings tab.
  7. Select the DMA option.

How do I know if my CD drive is working?

How Do I Tell If My CD Drive Is Working?

  1. Check Operation. Press the button to open the CD-ROM drive. The drive should open to accept a CD. …
  2. Check the Drive. Click “Start” on the taskbar. Click “Computer” on the right side of the Start menu. …
  3. Check Device Manager. Click “Start” on the taskbar. Click “Control Panel.”

When I put a CD in my computer nothing happens Windows 10?

This probably occurs because Windows 10 disables autoplay by default. To initiate installation, insert your CD and then: Select Browse and navigate to the TurboTax CD on your CD/DVD/RW drive (usually your D drive). …

How do I get my external CD drive to work on Windows 10?

Replies (10) 

  1. Press Windows key + X key and click Device Manager.
  2. Expand the DVD/CD ROM Drives.
  3. Right-click on the mentioned drive and click on Properties.
  4. Go to Drivers Tab and click on Update.
  5. Restart the computer and check.
IMPORTANT:  How much did DVD players cost at first?

How do I access my CD drive on Windows 10?

Start by pushing the drive’s Eject button, a rarely labelled button that lives next to or on the disc drive on the front of your computer. When the drive tray emerges, drop the CD into your CD drive and push the tray back into the drive.

When I put a CD in my computer nothing happens?

What’s most likely happened is that the “auto run” feature has been turned off – either on your system or on that specific drive. That means that by definition nothing happens when you insert a disc.

Why my CD is not detected?

Step 1: Reinstall disc recording software. … To correct the problem and allow the software to detect the drive again, uninstall the CD/DVD recording software, restart the computer, reinstall the disc recording software, then restart the computer again.

What causes CD-ROM failure?

If the power supply is not providing enough power to the disc drive, it can cause the disc drive to not be able to function properly. The disc drive may not be able to read CD or DVD without enough power. You can check the power supply to determine if it’s not working correctly.

Information storage methods