Why does my DVD player keep saying loading?

If the DVD player is not loading all discs, then there could be dirty or bad lens and mainboard of the DVD player. … Try another disc, if dvd player stuck on loading problem doesn’t happen with another disc, check if the problematic disc is dirty or scratched.

What do you do when a DVD won’t load?

How to Fix DVD Won’t Play – 7 Solutions

  1. Solution 1: Check if the DVD type is incompatible with DVD player.
  2. Solution 2: Clean the dirty DVD or try a different disc.
  3. Solution 3: Ensure solid connection between DVD player and TV.
  4. Solution 4: Install Third Party DVD Player Software.
  5. Solution 5: Update DVD Firmware.

How do you fix a DVD player that won’t read discs?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

IMPORTANT:  How do I choose a hard drive for storage?

How do you reset a DVD player?

On the DVD remote control, press the UP ARROW or DOWN ARROW button to select the SETUP icon. Press the ENTER button. Press the UP ARROW or DOWN ARROW button to select RESET . Press the ENTER button.

How do you troubleshoot a DVD player?

How to Troubleshoot a DVD Player

  1. Check audio connections to make sure they’re secure.
  2. Replace the cable connecting the DVD unit to your receiver.
  3. Clean the contacts on the player and receiver with electronics-grade contact cleaner.
  4. Make sure DVD is clean and unscratched.

What causes a DVD not to load?

If the DVD player is not loading all discs, then there could be dirty or bad lens and mainboard of the DVD player. You will need to first clean the DVD player with proper cotton and solution. If that doesn’t work either, consider sending the DVD player for repair or replacement.

What would cause a DVD player to not read discs?

No-disc errors are usually caused when the DVD or the laser-lens pickup has become dirty and causes the DVD player to not be able to read the DVD. … Clean the laser lens with a DVD laser lens cleaning disc. DVD laser lens cleaning discs can be purchased at most electronics retailers or online.

Why won’t my DVD player work on my smart TV?

Ensure the video cable between the DVD player and TV is securely connected to both devices. … NOTE: If the issue only occurs with the first DVD, then the disc may have dust, fingerprints or scratches. Ensure the TV and DVD player are set to utilize the same type of video signal, either progressive or interlaced .

IMPORTANT:  Can regular DVDs be played on PS4?

How do you know if your DVD player is bad?

Listen to the machine when you insert the DVD. If you hear noises in the form of a series of clicks and creak-like sounds as the lens and laser both engages and attempt to read the disc, your lens is likely still good, only dirty or otherwise having difficulty reading the disc.

How do you reset a DVD player without a remote?

To power reset, turn OFF the DVD player and unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord back into the electrical outlet and turn the player ON. Attempt to open the disc tray.

How do I reset my LG DVD player?

Press the HOME button on the remote control and select Settings > OTHERS > Initialize, then press ENTER or WHEEL. 2. Choose the option you require and select Close when finished. Factory Set – You can reset the player to its original factory settings.

Why is my brand new DVD not working?

Playback problems with a DVD typically are caused by one of four factors: The DVD is dirty and smudged; the laser lens in the DVD player’s disc drive needs cleaning; the DVD player no longer is tracking properly; or the disc is scratched.

Information storage methods