If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. After deleting the CD-ROM, reboot the computer. Windows should then detect the CD-ROM and reinstall it.
Why is my computer not detecting my CD DVD drive?
If CD/DVD drive name is missing displays, the drive is not being detected by Windows. Scan for hardware changes again to attempt to detect the drive. If the drive is still not detected, close Device Manager, reseat the drive cables if necessary, and skip to Reset the computer power to reset power.
What do I do if my laptop wont recognize my CD?
In the Device Manager window, expand DVD/CD-ROM drives. Right-click the CD/DVD/Blu-ray drive that is listed, and then click Uninstall. Click OK to confirm that you want to remove the device. Restart your computer (Once the restart is complete, the Operating System will automatically install the required drivers).
Why is my laptop rejecting my CD?
Accumulated dust and dirt can get on the tray and cause read errors on your CD. When those read errors are detected, the CD drawer will automatically eject to prevent damage to the drive and the laser lens. Shut the laptop down and remove the power cord. … Allow the laser lens cleaner to cycle, then try your CD again.
How do I enable my CD drive?
How to enable the DMA settings of a hard disk drive, CD-ROM, CD-R/RW and DVD-ROM drive?
- Start Control Panel.
- Double-click System.
- Click the Device Manager tab.
- For hard disk drive, click to expand Disk Drive. …
- Right-click on the necessary drive and click Properties.
- Click the Settings tab.
- Select the DMA option.
When I put a CD in my computer nothing happens Windows 10?
This probably occurs because Windows 10 disables autoplay by default. To initiate installation, insert your CD and then: Select Browse and navigate to the TurboTax CD on your CD/DVD/RW drive (usually your D drive). …
How can I solve Insert CD problem?
Step 2: If the drive is being detected in Device Manager try the below to update the drivers:
- Right click on Start button and select Device Manager.
- Expand DVD/CD ROM drives, right click on the drivers and click on Update driver software.
- Restart the computer and check if the issue persists.
When I put a CD in my computer nothing happens?
What’s most likely happened is that the “auto run” feature has been turned off – either on your system or on that specific drive. That means that by definition nothing happens when you insert a disc.
How do I connect an external CD drive to my laptop?
You can use an external CD drive on both your desktop and laptop. Insert one end of the USB cable into the external CD drive. Plug the other end of the cable into your computer’s USB port. Allow the computer to install the drivers for your external CD drive.
What causes CD-ROM failure?
If the power supply is not providing enough power to the disc drive, it can cause the disc drive to not be able to function properly. The disc drive may not be able to read CD or DVD without enough power. You can check the power supply to determine if it’s not working correctly.