You asked: Why is my external hard drive not showing up on my computer?

If the drive still isn’t working, unplug it and try a different USB port. … If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead. You might also try it in another computer.

Why is my external hard drive not detected?

Hard drive not detected error/issue can be caused by the following situations: The USB driver has become unstable, outdated or corrupt. USB ports become faulty, damaged or broken. Partition issues on your external USB device.

What do I do if my hard drive is not detected?

How to confirm whether the hard drive is spinning up or not?

  1. Boot the computer and try to catch some noise.
  2. Power off the system.
  3. Disconnect the power cord from the system.
  4. Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
  5. Reconnect the power cord to the system itself.
IMPORTANT:  Question: Which 256GB SSD is best?

How do I fix my WD external hard drive not showing up on my computer?

Go Disk Management > Find your external hard drive and right click it by choosing Change Drive Letter and Path… Assign the drive with a new letter that doesn’t exist in your PC and mark the Partition as Active. Click OK. Restart PC and your External hard drive will show up and work again.

How do I get Windows 10 to recognize my external hard drive?

I can’t access my external hard drive with Windows 10….

  1. Press Windows and X key together and select Control Panel.
  2. Click on Troubleshooting.
  3. Click on View all option on the left side of the Windows.
  4. Click on Hardware and Devices option.
  5. Click on Next and follow the onscreen instructions to troubleshoot the issue.

Why is my Seagate external hard drive not showing up?

If your Seagate external hard drive is detected, the original cable is the cause. If the problem still appears, connect the external hard drive to another USB port. … If your computer is desktop, you should make sure that the USB port into which the Seagate external hard drive plugs is on the back of your computer.

How do I fix Seagate External Hard Drive not detected?

Basic hardware troubleshooting steps:

  1. Try connecting the drive to a different port on the computer.
  2. If possible, try using a different cable.
  3. Try using the drive on a different computer.
  4. Verify the drive light is on. …
  5. Try a different power outlet.

How do I fix Windows not detecting my hard drive?

To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:

  1. Power off the computer.
  2. Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent.
  3. Turn on the system. Check to see if the hard drive is spinning.
IMPORTANT:  Your question: How do I check my hard drive for errors using CMD?

Why is my external hard drive not showing up in file explorer?

This can be caused by any of the following: Your drive does not have a drive letter assigned to it in Disk Management. The drive may be disabled or offline. Your USB driver may be corrupted.

How do I connect an external hard drive to my PC?

Connect the USB cable to the hard drive if not already connected and the other end to a USB port on the computer. Plug the other end of the USB cable into a USB port on the computer. After connecting the external hard drive to the computer, it should be recognized automatically by your computer’s operating system.

Information storage methods