Your question: Why is there no sound on my Samsung Blu Ray player?

No sound is heard when using the HDMI connection from the Blu-ray Disc player. Check the settings of HDMI Audio Output in System Settings. When HDMI Audio Output is set to HDMI2, check the connection of the HDMI OUT 2 jack on the Blu-ray Disc player and make sure that the connected device is turned on.

Why doesn’t my Samsung Blu Ray player have sound?

Turn the Blu-ray Disc player off and on again. NOTE: This normally resolves playback issues with MPEG2 PS files. … If the volume is very low, select the Audio DRC or BD Audio Mix of the Blu-ray Disc player to Off . Set the BD Audio Mix setting of the Blu-ray player to On if there is no sound once the movie started.

Why doesn’t my blu ray player have sound?

Check the TV’s sound output mode to ensure the internal speakers are set to ON and that the volume is not muted. Try to unplug the Blu-ray Player, then plug it back in again. Test the A/V cable on a different device, or try to use a known working cable on this Blu-ray Player. If the issue persists, Scedule a Repair.

IMPORTANT:  Do you need SSD for Lightroom?

Why does my DVD player have picture but no sound?

Below are the possible reasons for ‘DVD works but no sound on TV’ (if you DVD player has sound but no picture, check here): … Your DVD player is set in mute mode or can’t recognize the selected audio track. 2. The cable (HDMI, scart or another kind of cable) you use to connect DVD player and TV is connected incorrectly.

How do I get sound from my Blu Ray player?

The easiest way to access audio from a Blu-ray Disc player is to connect the player’s HDMI output to an HDMI-equipped TV. Since the HDMI cable carries both the audio and video signal to the TV, you can access audio from a Blu-ray Disc.

Do Blu-Ray players have audio outputs?

All Blu-ray players have an HDMI output to connect the player to your TV or receiver. … Many players offer optical or coaxial digital audio outputs for sending audio to an older home theater receiver or a sound bar.

How do you reset a Samsung Blu-Ray player?

How to Reset a Samsung Blu-Ray Player

  1. Make sure there is no disc in the player.
  2. Press and hold the Eject button on the device for at least 8 seconds.
  3. On the screen you will see a message that the device is being reset.
  4. The player will automatically power off and reset then it will show the initial setup screen.

Does HDMI carry sound?

Audio Quality :

HDMI is renowned for its video quality, but it also can carry audio without the need for multiple cables. HDMI supports Dolby TrueHD and DTS-HD for 7.1-channel sound for loss-less, theatre-quality audio. HDMI 1.4 also supports audio return channel, which sends sound from your TV tuner to your receiver.

IMPORTANT:  How many amps does an external SSD use?

How do I connect my Blu-ray player to my TV?

HDMI (In/Out)

  1. Connect an HDMI cable from the HDMI output on your Blu-ray Player, to the HDMI input on your TV.
  2. Make sure the both the Blu-ray Player and the TV are powered On.
  3. Set the Input on your TV to match the input you plugged the HDMI cable into.
  4. That’s all there is to it! You’re done.

Why is sound not working on TV?

Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. … If so, it may have been an issue with the HDMI sound not working on the TV. Swap out the media device for another one, or change the TV’s speaker output to the internal speakers to see if it fixes the sound.

How do I fix the sound on my VCR?

Press and hold the up or down arrow key labeled “Tracking” on the VCR remote for fine adjustments of the tape heads inside. Proper alignment of the tape heads with the magnetic VHS tape may restore audio.

What is PCM audio?

Pulse-Code Modulation (PCM) and the Dolby Digital® technology refer to different types of digital audio recordings. PCM is the conventional method for converting analog audio into digital audio. The PCM audio recorded on DVD is a two-channel digital, stereo audio track.

Information storage methods