How do I fix a SATA hard drive not detected?

Why is my SATA drive not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. … Be sure to check your SATA cables are tightly connected to the SATA port connection. The easiest way to test a cable is to replace it with another cable.

What do I do if my hard drive is not detected?

How to confirm whether the hard drive is spinning up or not?

1. Boot the computer and try to catch some noise.
2. Power off the system.
3. Disconnect the power cord from the system.
4. Remove the power cable when the hard disk is not detected, or the hard disk you are trying to fix.
5. Reconnect the power cord to the system itself.

How do I enable SATA drive?

To Set the System BIOS and Configure Your Disks for Intel SATA or RAID

1. Power on the system.
2. Press the F2 key at the Sun logo screen to enter the BIOS Setup menu.
3. In the BIOS Utility dialog, select Advanced -> IDE Configuration. …
4. In the IDE Configuration menu, select Configure SATA as and press Enter.

How do I get BIOS to recognize my hard drive?

Check for Auto Drive Detection

1. When you switch on the PC, press F2 for entering into the System Setup or CMOS Setup. …
2. Go to BIOS setup page.
3. Check if the hard disk drive detection is set to Auto or On.
4. If it is not, then make it on.
5. Press Save & Exit changes.

Why is my hard drive not showing up?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

How do I fix Windows 10 not detecting my hard drive?

How to fix “Hard drive not detected” on Windows 10?

1. Re-enable the missing drive in the Disk Management.
2. Reconnect the external hard drive.
3. Format the drive.
4. Check the status of the hard drive.
5. Update the driver.
6. Update Windows.
7. Reinstall USB controllers to make the second hard drive recognized.

Why my external hard disk is not working?

If the drive still isn’t working, unplug it and try a different USB port. It’s possible the port in question is failing, or just being finicky with your specific drive. If it’s plugged into a USB 3.0 port, try a USB 2.0 port. If it’s plugged into a USB hub, try plugging it directly into the PC instead.

How do I know if my SATA port is bad?

Bad Sata Port (or Cable) Symptoms

1. Occasional blue screen of death (BSOD) crashes.
2. Random long freezes – sometimes followed by an automatic shut down and restart.

How do I enable my hard drive in BIOS Windows 10?

To enable the hard drive in BIOS and make the second hard drive show up in Windows 10 correctly, do as follows.

1. Restart PC. Hold and press “F2” to enter the BIOS environment.
2. In the Setup section, check whether the second hard drive is turned off in the system setup. If yes, turn it on.
3. Reboot PC again.

Should I enable SATA hotplug?

Its not really an advantage unless you need the feature. Typically one don’t swich SATA drive on a daily basis. On the other hand there is no disadvantage in leaving it on.

How do I enable a disabled hard drive?

To enable a hard drive using Device Manager, use these steps:

1. Open Start.
2. Search for Device Manager and click the top result to open the app.
3. Expand the Disk drives branch.
4. Right-click the hard drive in question and select the Properties option. …
5. Click the Driver tab.
6. Click the Enable Device button. …
7. Click the OK button.