Absolutely yes,I also have two different brand HDD on my PC.
Do hard drives need to match?
It’s best to use identical hard drives with the same amount of hard disk space and speed. Any new hard drives will include connector cables to attach to the motherboard and the power supply. You might need an adapter cable if existing power cables don’t match up with the ports on your hard drives.
Are all hard drives compatible with each other?
Any computer motherboard and hard drive that share a supported connection standard will work with each other. Motherboards that have Peripheral Component Interconnect and PCI Express expansion slots can use adapter cards to work with unsupported hard drives.
Can I mix hard drives in a NAS?
If you are not creating RAID but have two separate volumes for each drive, then you can benefit from maximums speed from the black drive or pro drive. But yes, you can mix drives.
How long do NAS drives last?
They live an average of three to five years. The correlation here is all on the inside. Servers and hard drives both contain vital moving parts that make them susceptible to failure. These failures can be attributed to kinetic energy, lubrication issues, and general wear over time.
Are old hard drives compatible with new motherboards?
When replacing a motherboard you can almost certainly use your hard disks, the question is how much additional work and configuration you might need. as to what drive they are on? The short answer is yes you can probably do what you’re suggesting.
Are HP hard drives interchangeable?
As long as they use the same interface, yes. Laptop/desktop vendors use hard drives from the same set of vendors (Seagate, Hitachi, WD, etc) which use interchangeable standard connectors. Older drives used the IDE/PATA standard while newer drives use SATA.
What is the solution if the hard drive is not compatible?
If the hard drive’s disk format or file system is not compatible with your system, then it can also trigger this hard disk problem. To fix this, you can just format the drive. Simply connect it to your system, open My Computer, and right-click the hard drive’s icon.
Do all drives in NAS have to be same size?
Some NAS units absolutely require drives to be identically sized. If it is only capable of presenting one Volume to the network, this is good because dissimilar drives create wasted space. More advanced NAS units can present multiple Volumes, so you can deal with have sets of differently sized drives.
Do all hard drives in a NAS have to be the same size?
If you want to use mirror the disks (raid 1) then you can probably use different size disks but you will only get the total capacity of the smallest disk. If you want to use raid 5 for better redundancy you will have to use the same size of disks.
Do hard drives have to be the same size for RAID?
In a RAID 1 configuration, the size of target disk must be greater or equal to the one of the source disk. Therefore the capacity of the array will be same as the one of the smallest size in the group. The only exception is a spanned volume.
Can a hard drive last 10 years?
—is that the average hard disk lasts somewhere between 3 and 5 years before it will fail and need to be replaced. Some will last beyond 10 years, but these are the outliers. When an HDD fails, it will not be repairable without great expense, and so the data stored upon it will very likely be lost forever.
Do hard drives go bad if not used?
The magnetic field can wear down or break down over time. So, it is possible that the hard drives go bad without use. Hard drives have moving parts, which are lubricated in some manner or form to avoid friction. … A hard drive will absolutely deteriorate if it is not been used for several years.
How often should NAS drives be replaced?
NAS disk rotation – replacing HDDs every two years.