How do I get my WD hard drive to work?

How do I get my WD external hard drive to work?

Go Disk Management > Find your external hard drive and right click it by choosing Change Drive Letter and Path… Assign the drive with a new letter that doesn’t exist in your PC and mark the Partition as Active. Click OK. Restart PC and your External hard drive will show up and work again.

Why my WD hard drive is not working?

Here are some possible reasons for a WD hard drive not recognized: A hardware problem (damaged components such as a scratched platter or a failed headstack) File system corruption of the hard drive partition. Issues with a hard drive partition.

Why is my WD hard drive not showing on computer?

If it shows but it does not show a drive letter, make sure you give it one. Also, try to connect the drive to a USB port in the back of the computer, avoid using a USB hub. You can also try uninstalling the usb driver and once you restart the computer, the drivers should get reinstalled by the operating system.

IMPORTANT:  Should you still buy DVDs?

What do I do if my external hard drive is not detected?

What to Do When Your External Hard Drive Won’t Show Up

  1. Make Sure It’s Plugged In and Powered On. …
  2. Try Another USB Port (or Another PC) …
  3. Update Your Drivers. …
  4. Enable and Format the Drive in Disk Management. …
  5. Clean the Disk and Start From Scratch. …
  6. Remove and Test the Bare Drive. …
  7. Our Favorite External Hard Drives.

How can I fix my external hard drive?

Method 3. Run CMD to Repair Corrupted External Hard Drive Without Formatting

  1. Press Win+R, type: cmd and click Enter;
  2. Type: diskpart and hit Enter;
  3. Type: list disk and hit Enter;
  4. Type: select disk 0 and hit Enter; (0 stands for the drive letter of your corrupted external hard drive.)

How do I fix my WD Passport not recognized?

Reconnect the WD drive via a new USB hub or to a new PC.

  1. If the WD Passport drive shows up, it is the damaged USB hub that stops WD from showing up.
  2. If the WD passport is not detected either on your current or the new PC, replace the WD drive with a new one.

How do I unlock my WD Passport?

▪ Go > Applications > WD Drive Utilities



On the Unlock Drive dialog: a. Type your password in the Password box. b. Click Unlock Drive.

Why is my hard drive not detected?

The BIOS will not detect a hard disk if the data cable is damaged or the connection is incorrect. Serial ATA cables, in particular, can sometimes fall out of their connection. … The easiest way to test a cable is to replace it with another cable. If the problem persists, then the cable was not the cause of the problem.

IMPORTANT:  Question: Does new SSD need new driver?

Why won’t my hard drive show up on my PC?

If your new harddisk is not detected by or Disk Manager, it could be because of a driver issue, connection issue, or faulty BIOS settings. These can be fixed. Connection issues can be from a faulty USB port, or a damaged cable. Incorrect BIOS settings may cause the new hard drive to be disabled.

How do I connect my WD hard drive to my laptop?

Connect the USB cable to the hard drive if not already connected and the other end to a USB port on the computer. Plug the other end of the USB cable into a USB port on the computer. After connecting the external hard drive to the computer, it should be recognized automatically by your computer’s operating system.

Information storage methods