How do I install a CD DVD drive?

Why is my computer not detecting my CD DVD drive?

Reinstall or Update Driver in Device Manager



Boot to the Windows 10 desktop, then launch Device Manager by pressing Windows key + X and clicking Device Manager. Expand DVD/CD-ROM drives, right-click the optical drive listed, then click Uninstall. … Windows 10 will detect the drive then reinstall it.

How do I get my external CD drive to work?

Insert one end of the USB cable into the external CD drive. Plug the other end of the cable into your computer’s USB port. Allow the computer to install the drivers for your external CD drive. Usually the computer will recognize the external drive and automatically install the drivers for the device.

How do I install a CD without a CD drive?

Plug the USB cable into one of the USB ports on the notebook. For instructions on installing and using your external drive, see the documentation that came with the USB CD/DVD drive. After installing the drive, insert the software disc into the drive and proceed with the software installation.

IMPORTANT:  Frequent question: How do I listen to blu ray audio?

How do I insert a CD into my HP desktop?

Straighten the paper clip and insert it into the manual release hole until resistance is felt. Press in gently on the paper clip until the tray is released. Releasing the lock will allow the tray to open a small distance. Remove the paper clip and gently pull out the drawer until the disc is accessible.

Why is my DVD drive not reading dvds?

Check the Disc



Swap out the disc – if cleaning fails, your disc might be far too damaged to allow it to play properly. Try swapping out the disc to make sure that it wasn’t a hardware issue. Check for compatibility – Most CD drives can play recordable(R) and rewritable(RW) discs.

How do I fix my CD DVD drive?

How to Update Your CD/DVD Driver

  1. Launch Device Manager. Right-click the Start menu and select Device Manager.
  2. Right-Click Your Device. Double-click to expand the DVD/CD-ROM section, then right-click your device.
  3. Update the Driver. Click the Update Driver option.
  4. Install the New Driver.

Can’t find DVD CD-ROM drives in Device Manager?

Try this – Control Panel – Device Manager – CD/DVD – double click the device – Driver’s Tab -click Update Drivers (this will likely do nothing) – then RIGHT CLICK the drive – UNINSTALL – REBOOT this will refresh the default driver stack. Even if drive is not shown continue below.

How do I play a DVD on an external drive?

How to Play a DVD on My Computer With an External Hard Drive

  1. Connect the external hard drive to your computer through the provided USB data cable. …
  2. Obtain a new DVD movie player program. …
  3. Double-click the downloaded file. …
  4. Insert the DVD movie into your computer.
IMPORTANT:  How do you post a hard drive?

How do I boot from an external DVD drive?

Connect the external CD/DVD drive. Start the system and start tapping at HP/Compaq Logo screen, it will start a one time boot menu that will allow you to choose to boot from USB which is your external CD/DVD Drive…

When I put a CD in my computer nothing happens Windows 10?

This probably occurs because Windows 10 disables autoplay by default. Hold down the Windows + R keys to open the Run window. … Select Browse and navigate to the TurboTax CD on your CD/DVD/RW drive (usually your D drive).

Information storage methods